04 Hepburn and Sons LLC_NSRP Electrical Panel Meeting 2020
04 Hepburn and Sons LLC_NSRP Electrical Panel Meeting 2020
Using MELD to Additively Manufacture Flight Deck Tie Downs (2019-376-005)
SUMMARY This project will produce flight deck tie downs using the AFSD method of AM while maintaining the same geometry and function of current tie downs. The focus will be...
Electrical Cable Fire Protection (2019-376-004)
OBJECTIVE: The Electrical Cable Fire Protection RA project will research and integrate a fire protection technology to enhance the life of Navy ships by coating electrical cables with an intumescent...
Onboard Ship Integration of Laser Peening System for Lasting Aluminum Repairs 2019-376-003
OBJECTIVE The project’s primary goal is to install a laser peening system onboard an LCS platform, treat its aluminum deck, and have NSWC Carderock certify the technology for shipyard use....
Research & Develop Insulated Bus Pipe (IBP) Standard Interface to Naval Electrical Equipment
OBJECTIVE The objective of this project will be to study the various alternatives for Insulated Bus Pipe (IBP) connector types that are possible for improving cost controls and increasing commonality...
Qualification Testing of Insulated Bus Pipe (IBP) for Shipboard Introduction
OBJECTIVE The objective of this project is to qualify Insulated Bus Pipe (IBP) for shipboard introduction and to research and develop a coaxial IBP with low magnetic signature for MVDC...
Integration of Scanning & Laser Peening Technology in Shipyards
OBJECTIVE: The primary goal of this project was to research, develop, and certify laser peen forming capabilities with the purpose of applying them to shipbuilding materials to form compound curvatures...
Land Based Case Study of Insulated Bus Pipe for Ship Design
OBJECTIVE: The overall objective of this project was to physically demonstrate the ROI and benefits of using IBP in a shipboard application simulated at FSU CAPS, allowing shipyards to witness...
Foundational Technology for Scanning & Laser Peening in Shipyards
Objective: The primary goal of this project is to research and develop the requirements and integration steps necessary to establish the foundational work related to the development of a scanning...
Mitigation of Stress Corrosion Cracking, Cavitation Erosion & Forming Complex Shapes Using Laser Peening
Objective: The objective of this project was to evaluate the benefits of using laser peening within the shipyard industry during new construction and repair phases with a focus on aluminum...
Laser Peening of Ship Structures to Reduce Production Costs
Objective: Demonstrate the benefits of using laser peening within the shipbuilding industry. Laser peening (TRL 9) will be shown to improve shipbuilding manufacturing processes by strengthening components, shaping metal without...